archive-com.com » COM » E » ENFOLDSYSTEMS.COM

Total: 720

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • FAQ
    you enable it again As stated above Enfold Proxy exists within IIS so it is not possible to start or stop it separately unless you decide to turn IIS off as well If you are stuck or wish to view your Plone IIS site without Enfold Proxy or your proxy definitions the easiest thing to do is to backup the configuration file eep ini to a safe place and delete the normal file That will wipe out the proxy definitions until you copy the eep ini file back Your changes will take effect after you run eep exe This is especially useful for eliminating the possibility of IIS misconfiguration problems What is a proxy definition How is that different from hosts Previous EP versions used the word host instead of proxy definition That caused confusion For this version proxy definition refers to any EP settings for one IIS site which has a unique host header See adding a proxy definition What name should I give to my proxy definition The name you choose for your proxy definition is arbitrary and only appears in the EP configuration tool If I modify a proxy definition in EP when do the changes take place Do they happen automatically It should take effect immediately But you may need to confirm that these changes are reflected in IIS In most cases whenever you save something in EP the affected IIS site will be reconfigured to have these changes Occasionally you may need to restart IIS for these changes to show up How do I back up my configuration settings The easiest way is to copy the eep ini file to a safe place Typically it is located in C Program Files Enfold Proxy directory If this file is not visible be sure you have configured Windows to allow you to see ini files Control Panel Folder Options View and be sure Show Hidden Files is checked For easy restore of your settings you can replace the entire file with your backed up copy or copy the relevant contents into the new file Is it better to use the Proxy Configuration Tool or to edit the config file manually See Configuring EP Manually Generally it is better to use Proxy Configuration tool It reduces the possibility of misconfiguration What is the maximum number of proxy definitions I can set up Generally there is no maximum However the EP configuration utility will become unwieldly if you 10 or more proxy definitions It may be easier to configure the proxy definitions manually by editing the eep ini file See Configuring EP Manually Whatever happened to the virtual plone folder which appeared in IIS after a proxy definition was created A virtual folder named plone used to appear in the IIS Management console after a proxy definition was created This no longer is the case How do proxy logs get rotated Go to EP Configuration utility and choose settings You can set backup count and the maximum file size for each log file See logging options Does EP affect the gathering of web statistics Because EP is simply a filter for IIS the IIS log files should not be affected For this reason any web statistical tool which analyzes IIS log files should provide accurate data Can I use multiple proxy definitions for the same IIS site What restrictions apply Typically an IIS site is associated with a single proxy definition in EP But EP doesn t restrict you from having multiple proxy definitions IIS itself has restrictions regarding how multiple sites can be configured see the IIS docs for details How do I force all Zope Plone logins to be Secure Sockets Layer SSL To force all web accesses for a web domain to be by SSL you need to configure IIS to require SSL login Open IIS right click Default Web Site select Directory Security Secure Communications edit Choose the option Require Secure Channel This assumes that you have already created a new SSL Certificate for the server or imported an existing one read your IIS documentation for how to do that Is EP like Virtual Hosting Monster VHM in Zope EP uses VHM to ensure Zope generates correct references in URLs But EP includes another mode Simple rewrite mode to proxy non Zope requests as well See Simple Rewrite Mode How do I verify that Load balancing is working Load balancing the server load with more than one Zope clients which are configured in Plone The easiest way to verify that load balancing works is to try access webpages using its management port instead of port 80 such as http localhost 8080 or http www originalfunsite com 9090 In this case you will probably not see the Plone site but the front page to the Zope management Interface To see the actual Plone site you d have to type the path with the Plone site folder such as http localhost 8080 Plone How do I verify that my Include Exclude Rewrite rule has processed successfully Typing a specific URL in the browser would be the easiest way to see if the rule worked You can also run the command line tool eepcheck If you execute it with a show excludes argument this will print a list of all items found by this auto exclude processing Do I need to restart Plone whenever I make a change to EP No In general EP changes affect IIS not Plone Generally whenever you make a change inside the EP Configuration Utility pressing the Save button will make IIS aware of the changes Occasionally you may need to restart the specific IIS site by right clicking the IIS site itself or restarting the IIS Server itself if these changes aren t working Can I use the ISAPIRewrite product with EP for more advanced rewriting requirements Yes but only the full version with free 30 day trial EP does not work correctly with the lite free version Caching and Enfold Proxy

    Original URL path: http://www.enfoldsystems.com/software/proxy/docs/7.1/faq.html (2016-02-11)
    Open archived version from archive


  • EP Interface Guide
    used directly if you want a port specified you must include it in the value Cache Options See also Configuring Cache with Enfold Proxy Note about configuring these options manually All the cache options for a particular host section are set directly in that host section inside the eep ini file In eep ini each host section corresponds with a proxy definition All cache related configuration options are prefixed with cache User interface Configuration file Default Description Cache enabled cache enabled True Indicates if caching should be enabled Cache directory cache directory Leaving it blank will put cache directory inside Program Files Enfold Proxy cache directory If you change you must use an absolute paths i e C My Documents cache See the cache directory for more information Default age for items cache default age 0 For content without explicit expiry information how long in seconds should the page be considered fresh If this is not zero EP will cache everything for at least that duration even data that is updated frequently Maximum size of cache cache max size 100000000 The maximum size of the cache in bytes This size may temporarily be exceeded depending on the transient load factor option Maximum item size cache max item size 200000 The maximum size of an item that will be cached Items larger than this will not be stored Note that when items bound for the cache are read from the remote host they will be buffered in memory so this value will affect memory usage Transient load factor cache transient load factor 1 2 The factor by which the cache may temporarily exceed max size until the cache scavenger reduces it back This is to avoid a client connection taking the penalty of cache expiry if the cache is full Scavange delay cache scavenge delay 60 How often the cache scavenger runs The cache scavenger will reduce the cache back down to max size and flush the cache index to disk Cache other response allow non 200 False Enables caching of responses other than 200 such as redirects 301 302 and not founds 404 if such responses have appropriate cache headers Object Cache Options These options modify the in memory cache used by the XSLT processing as described in XSLT caching You cannot enable these options with the EP Configuration Tool instead you need to add the options by manually configuring the eep ini file Configuration file Default Description object cache enabled False Is the object cache enabled object cache max len 50 Number of items in the cache object cache default age 600 10 mins Length of time these items are cached object cache log level WARNING The level of logging messages generated by this cache The log messages are currently sent to the main proxy log ZEO and Load Balancing options See also Configuring Load Balancing Enfold Proxy has the ability to balance requests between any number of hosts It is assumed that all these hosts are identical Plone

    Original URL path: http://www.enfoldsystems.com/software/proxy/docs/7.1/dialogoptions.html (2016-02-11)
    Open archived version from archive

  • Configuring EP Manually
    of this topic goes into more detail about best practices for configuring your eep ini file manually Remember that if you only use the EP configuration tool this information will not apply Tips for Editing the eep ini file Vista Windows 7 Users Vista s security model is intended to prevent the user from accidentally writing editing system or configuration files The Encontrol configuration utility will automatically prompt for the necessary elevation of privileges but if you wish to edit this file by hand you will need to do so from a process that is already elevated ie started with Run as Administrator see the Vista documention about how to do that In order to use the configuration file directly go to Start Enfold Proxy Configuration File This file can be edited with any text editor and is laid out like any other Windows INI file Throughout this documentation this image is used to highlight instructions for editing the configuration file Don t forget If you edit eep ini manually you must run eep exe afterwards If you do not your edits may not take effect Most settings are insensitive to case but lines should begin in the left column i e have no leading whitespace unless they are part of a line continuation see section below Except where noted all settings can be changed without restarting IIS however the new options will not be processed until a connection is made to Enfold Proxy If you make a configuration change you should visit the proxy in your browser to ensure the changes have taken effect as expected If your site configuration is quite complex such that your INI file becomes difficult to manage be sure to read the documentation on using variables in configuration files Continuing Long Lines If you maintain the configuration file in a text editor rather than via the UI utility it is possible to split configuration values over multiple lines Simply continue the value on the next line but ensure that line begins with at least one space or tab For example host 1 includes file1 file2 file3 file4 file5 Note that the UI utility may merge the multiple lines back into one when saving Using Variables in Configuration Files Enfold s INI files have a feature that make setting up large configuration files quite simple you can define variables in the INI file and can then refer to these variables in the configuration values In the simplest example let assume you had a large number of excludes to specify One way of doing this is as follows host something jpg files foo jpg bar jpg css files logo css myapp css excludes jpg files s css files s In this example we have defined 2 variables jpg files and css files As these variable names to not match any configuration options used by EP they have no effect on EP itself excludes is an EP option and its value is defined as being the concatenation

    Original URL path: http://www.enfoldsystems.com/software/proxy/docs/7.1/configuringmanually.html (2016-02-11)
    Open archived version from archive

  • IIS & Enfold Proxy
    interacts with Enfold Proxy EP Plone and Active Directory AD when you are using NTLM Authentication Enfold Proxy is not actually involved with providing authentication EP s main job is to translate URLs from Plone and to arrange for cached copies of web resources to be available so IIS doesn t have to keep requesting them from Plone Several things are worth pointing out about this diagram In two cases 2b and 4b Enfold Proxy is returning cached content If you are using Plone for authentication and not Active Directory you would be using cookie based authentication which takes place mainly in Plone Therefore separate requests would have to go to Plone specifically for cookies based login These arrows are not shown here The main goal of Enfold Proxy is to reduce the number of 4A 5 and 6 requests and instead to use as many 2b and 4b requests as possible Print this page Send this page Try Now Enfold Proxy 30 day free trial Download Enfold Proxy 495 per new license or 245 per renewal Pricing FAQ Testimonial I have never come across a product that was so easy to install and use as Enfold Proxy And not

    Original URL path: http://www.enfoldsystems.com/software/proxy/docs/7.1/iisproxy.html (2016-02-11)
    Open archived version from archive

  • Table of Contents
    link Enter the word below Required Try Now Enfold Proxy 30 day free trial Download Enfold Proxy 495 per new license or 245 per renewal Pricing FAQ Testimonial I have never come across a product that was so easy to install and use as Enfold Proxy And not only that I literally had it installed and working within 2 minutes of purchase Thank you for building a product that does

    Original URL path: http://www.enfoldsystems.com/software/proxy/docs/7.1/index.html/sendto_form (2016-02-11)
    Open archived version from archive

  • Enfold Proxy Downloads
    about this link Enter the word below Required Try Now Enfold Proxy 30 day free trial Download Enfold Proxy 495 per new license or 245 per renewal Pricing FAQ Testimonial I have never come across a product that was so easy to install and use as Enfold Proxy And not only that I literally had it installed and working within 2 minutes of purchase Thank you for building a product

    Original URL path: http://www.enfoldsystems.com/software/proxy/enfold-proxy-downloads.html/sendto_form (2016-02-11)
    Open archived version from archive

  • proxy_intro

    (No additional info available in detailed archive for this subpage)
    Original URL path: /static/flash/training/proxy_intro/proxy_intro.htm (2016-02-11)


  • Enfold Desktop - Windows 7 / Plone 4 compatibility
    address of your friend and we will send an email that contains a link to this page Address info Send to Required The e mail address to send this link to From Required Your email address Comment A comment about this link Enter the word below Required Try Now Enfold Desktop Free to use Download Privacy Sitemap Contact Us Copyright 2016 Enfold Systems Inc The Plone Experts All rights reserved

    Original URL path: http://www.enfoldsystems.com/news/enfold-desktop-windows-7-plone-4-compatibility/sendto_form (2016-02-11)
    Open archived version from archive



  •