archive-com.com » COM » I » IKELITE.COM

Total: 795

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Ikelite | 1-inch Ball Mount Mark II for DS51, DS125, DS160, DS161 Strobes
    system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times This ball mount replaces

    Original URL path: http://www.ikelite.com/accessories/4081.4-ball-mount-mark-ii.html (2016-02-17)
    Open archived version from archive


  • Ikelite | 1-inch Ball Mount Mark II for Vega
    Vega Video Photo Light for attachment to 1 inch diameter ball arms from Ikelite TLC Ultralight Nauticam and others Requires a compatible 1 inch Ball Clamp sold separately about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times This ball mount replaces our Product Number 9571 25 what s included Ball mount with o ring Stainless steel screw specifications 1 in 25 4 mm diameter ball Type III hard coat anodized aluminum spare parts 0138 18 O ring documentation Instructions pdf Where to buy The MSRP referenced is a suggested US market retail price Actual sales prices are set exclusively by Authorized Ikelite Dealers Most popular accessories 1 inch Ball

    Original URL path: http://www.ikelite.com/accessories/4081.5-ball-mount-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Ball Mount Mark II for DSLR Top Mount
    separately about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all

    Original URL path: http://www.ikelite.com/accessories/4081.6-ball-mount-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Ball Arm Extension Mark II 7-inch Length
    wide angle lens The slotted design allows for the attachment of a lightweight accessory in the middle of the extension When used with our Sliding Ball Mount the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times This ball arm extension replaces our Product Number 0466 62 what s included Ball mount with o ring Stainless steel screw Three pronged wing nut specifications 1 in 25 4 mm diameter ball Type III hard coat anodized aluminum spare parts 0138 18 O ring documentation Instructions pdf Where to buy The

    Original URL path: http://www.ikelite.com/accessories/4081.07-7-inch-ball-arm-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Ball Arm Extension Mark II 5-inch Length
    with a wide angle lens The slotted design allows for the attachment of a lightweight accessory in the middle of the extension When used with our Sliding Ball Mount the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s included Ball mount with o ring Stainless steel screw Three pronged wing nut specifications 1 in 25 4 mm diameter ball Type III hard coat anodized aluminum spare parts 4081 01 O rings set of 10 0138 18 O ring documentation Instructions pdf Where to buy The MSRP

    Original URL path: http://www.ikelite.com/accessories/4081.05-5-inch-ball-arm.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Ball Arm Extension Mark II 12-inch Length
    design allows for the attachment of a lightweight accessory in the middle of the extension When used with our Sliding Ball Mount the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s included Ball mount with o ring Stainless steel screw Three pronged wing nut specifications 1 in 25 4 mm diameter ball Type III hard coat anodized aluminum spare parts 4081 01 O rings set of 10 0138 18 O ring documentation Instructions pdf Where to buy The MSRP referenced is a suggested US market retail

    Original URL path: http://www.ikelite.com/accessories/4081.12-12-inch-ball-arm.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Sliding Ball Mount Mark II
    to reposition lighting easily during your dive Requires a Ball Arm Mark II Extension sold separately about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves

    Original URL path: http://www.ikelite.com/accessories/4081.72-ball-mount-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Standard Ball Clamp Mark II
    Thicker plates provide the perfect combination of strength and range of motion Plates are spring loaded for easy assembly and breakdown of your arm system A hard anodized aluminum wing nut allows for easy one handed operation and will withstand years of use about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times This clamp replaces our Product Number 9571 2 what s included Clamp with wingnut specifications Accepts 1 in 25 4 mm diameter ball Aluminum clamp plates and wing nut Type III hard coat anodizing documentation Instructions pdf Where to buy The MSRP referenced is a suggested US market retail price Actual sales prices are set exclusively by

    Original URL path: http://www.ikelite.com/accessories/4081.2-ball-clamp-mark-ii.html (2016-02-17)
    Open archived version from archive



  •