archive-com.com » COM » I » IKELITE.COM

Total: 795

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Ikelite | 1-inch Ball Clamp Mark II for Lightweight Accessories
    travel every ounce counts so we reduced plate thickness and chose a light three prong wing nut to reduce weight as compared to our Standard Clamp The result is a lighter maneuverable clamp with the perfect amount of holding power for small lights and accessories which weigh less than one pound Plates are spring loaded for easy assembly and breakdown of your arm system about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s included Clamp with wingnut specifications Accepts 1 in 25 4 mm diameter ball Aluminum clamp plates with plastic wing nut Type III hard coat anodizing documentation Instructions pdf Where to buy The MSRP referenced

    Original URL path: http://www.ikelite.com/accessories/4081.21-accessory-ball-clamp-mark-ii.html (2016-02-17)
    Open archived version from archive


  • Ikelite | 1-inch Ball Clamp Mark II with Auxiliary Mount
    Accessory Clamp attaches two 2 1 inch diameter balls The base plate accepts the Ikelite Auxiliary Ball Mount for the attachment of additional lightweight accessories in the middle of your strobe arm Perfect for adding a spare modeling light or video light Plates are spring loaded for easy assembly and breakdown of your arm system about our ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s included Clamp with wingnut specifications Accepts 1 in 25 4 mm diameter ball Aluminum clamp plates and wing nut Type III hard coat anodizing documentation Instructions pdf Where to buy The MSRP referenced is a suggested US market retail price Actual sales prices

    Original URL path: http://www.ikelite.com/accessories/4081.22-auxiliary-ball-clamp-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Auxiliary Ball Mount Mark II
    ball arm system Mark II The ever growing selection of lighting accessories on the market demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s

    Original URL path: http://www.ikelite.com/accessories/4081.71-ball-mount-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | 1-inch Triple Ball Clamp Mark II
    demands a mounting system that s highly expandable flexible and streamlined In answer to this need the second generation of our 1 inch ball arm system provides improved ergonomics and versatility in a lighter sleeker package Possible combinations are virtually endless with opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm The 1 inch Ball Arm System Mark II features 1 inch ball components with a groove and o ring to prevent slippage for improved holding power with less force While underwater clamps may be finger tightened to keep lighting in place yet allow repositioning without loosening the clamp All parts are hard coat type III anodized for a long lasting scratch resistant finish compatibility Works with 1 inch ball arms from Ikelite TLC Ultralight Nauticam and others Old and new Ikelite 1 inch balls and clamps are interchangeable For the best performance we recommend combining like components within a single clamp two balls with grooves or two balls without grooves Ball components with an o ring groove should have an o ring installed at all times what s included Clamp with wingnut specifications Accepts 1 in 25 4 mm diameter ball Aluminum clamp

    Original URL path: http://www.ikelite.com/accessories/4081.23-triple-ball-clamp-mark-ii.html (2016-02-17)
    Open archived version from archive

  • Ikelite | DSLR Top Mount 1 in Ball Kit for Gamma
    80 Product Number 1887 1 Based on our popular SA 100 1in 2 5 cm diameter ball socket arm system this mount kit includes everything you need to use your Gamma as a focus assist or macro video light Compatible with Ikelite DSLR housings featuring a top mount Gamma flashlight not included what s included Diffuser with lanyard Flashlight mount for 1 in ball systems Clamp DSLR top mount 1

    Original URL path: http://www.ikelite.com/accessories/1887.1-gamma-dslr-mount.html (2016-02-17)
    Open archived version from archive

  • Ikelite | DSLR Top Mount Flex Kit for Gamma
    Buy DSLR Flex Mount Kit for Gamma MSRP 60 Product Number 1887 2 This mount kit is super lightweight flexible and includes everything you need to use your Gamma as a focus assist or macro video light Compatible with Ikelite DSLR housings featuring a top mount Gamma flashlight not included what s included Diffuser with lanyard Flashlight mount for flex systems 4 piece 1 2 inch flex extension DSLR top

    Original URL path: http://www.ikelite.com/accessories/1887.2-gamma-dslr-mount.html (2016-02-17)
    Open archived version from archive

  • Ikelite | Quick Release Kit for Gamma
    This mount kit is super lightweight flexible and includes everything you need to attach your Gamma to an Ikelite release handle for use as a focus assist or macro video light Compatible Ikelite trays with release handle s are available to fit most Ikelite and non Ikelite compact digital systems sold separately Gamma flashlight not included what s included Diffuser with lanyard Flashlight mount for flex systems 4 piece 1

    Original URL path: http://www.ikelite.com/accessories/1887.3-gamma-quick-release.html (2016-02-17)
    Open archived version from archive

  • Ikelite | Tubing Mount Kit for Gamma
    MSRP 45 Product Number 1887 4 This mount kit is super lightweight flexible and includes the essentials to use your Gamma as a focus assist or macro video light The tubing mount attaches to any Ikelite 3 4in flex arm as featured on the AF35 AutoFlash or around any stem mount at Ikelite release handle Ikelite product numbers 9571 3 9571 31 9573 3 9573 31 not included Gamma flashlight

    Original URL path: http://www.ikelite.com/accessories/1887.4-gamma-tubing-kit.html (2016-02-17)
    Open archived version from archive



  •