archive-com.com » COM » M » MT.COM

Total: 1113

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Mettler-Toledo (Albstadt) GmbH, 72458 Albstadt, Germany - General Delivery and Payment Conditions - METTLER TOLEDO
    can be used by the customer in accordance with the contractually agreed intended purpose delivery of the remaining goods in the order is guaranteed and the customer does not incur any significant extra or additional costs as a result unless the Company itself has indicated that it will pay such costs 5 Transfer of risk delayed acceptance 5 1 The risk shall pass to the customer at the latest when the goods are handed over as determined by the commencement of the loading operation to the forwarding agent carrier or otherwise to third parties appointed for the execution of shipment This provision shall also apply where partial deliveries are affected or where the Company has agreed to perform other services e g shipment or installation In the event that shipment or handover is delayed as a result of circumstances for which the customer is responsible the risk shall pass to the customer with effect from that date on which the Company is ready to ship and has indicated the fact to the customer 5 2 In the event that the customer delays in acceptance omits to perform some duty of co operation or in the event that the Company s delivery is delayed for other reasons attributable to the purchaser the Company will be entitled to demand compensation for the resulting losses including any additional expenditure e g storage costs In the event that goods are stored by the seller the storage costs shall be 0 25 of the value of the invoice for the goods to be thus stored per week expired commencing with the delivery period or in the absence of a delivery period with the notice of readiness for shipment of the goods Proof of any greater loss and the Company s legal claims in particular compensation for additional expenses reasonable compensation cancellation shall remain unaffected hereby the flat rate sum will however be set off against more extensive monetary claims The purchaser will be permitted to produce proof that the Company has incurred no loss at all or only a significantly smaller loss than the abovementioned flat rate sum 6 Prices and payment conditions 6 1 Prices are to be understood as being exclusive of turnover tax ex works EXW Incoterms 2000 All ancillary costs e g costs for special packaging insurance transport export import official permits and inspections shall be for the account of the customer Transport packaging and all other packaging required pursuant to the Packaging Order will not be taken back by the Company and with the exception of pallets will become the property of the purchaser 6 2 The Company will only take out transport insurance at the express wish of the customer and at the latter s expense 6 3 In the event that the customer wishes the goods to be erected and assembled by the Company this will be done at the customer s expense Save where otherwise agreed the costs of assembly will not be included in the agreed price 6 4 Payments must be made by the customer in euros in cashless form within 30 days after the date of the invoice by transfer to the bank account indicated by the Company without deduction of discounts expenses taxes or fees of any kind bank charges in particular shall be for the account of the customer The customer may also pay by cheque Cheques will however only be accepted by the Company by way of performance Fig 6 4 sentence 1 will apply mutatis mutandis in the case of payment by cheques Bills of exchange will not be accepted 6 5 Upon the expiry of the aforementioned payment period the customer will be in default During the period of default the purchase price will attract interest at the statutory interest rate for arrears from time to time in force The Company reserves the right to claim for more far reaching loss caused by default The Company s claim against traders for commercial interest on maturity 353 Commercial Code will remain unaffected 6 6 The customer will be entitled to exercise a right of set off or retention only insofar as his claim has been confirmed by the courts or is unchallenged 6 7 In the event that it becomes clear after the contract has been made that the Company s claim to the purchase price is likely to be jeopardised by inability to pay on the part of the customer e g by application for insolvency proceedings the Company will be entitled in accordance with the provisions of the law to refuse performance and where need be after the setting of a time limit to withdraw from the contract 321 Civil Code In contracts for the manufacture of non generic goods individual production the Company may declare its intention to withdraw immediately the provisions of the law concerning the dispensability of setting a time limit shall remain unaffected 6 8 In objectively justified cases the Company will be entitled to demand of the customer a down payment to the value of 40 of the value of the order An objective justification will be deemed to exist where the value of the order exceeds EUR 25 000 and or the Company is obliged to produce to the customer s requirements In such cases the customer shall be obliged to effect prior performance Such down payment will be payable within 14 days of the raising of the invoice 6 9 Where the situation regarding costs has changed the Company reserves the right to make an appropriate correction to the price provided always that the making of the contract and the date of delivery are separated by a period of more than four months and the increase does not constitute more than 5 of the originally agreed price 7 Retention of ownership 7 1 Until such time as all present and future claims of the Company under the purchase contract and a routine business relationship secured claims have been paid in full

    Original URL path: http://fr.mt.com/fr/fr/home/site_content/legal/commercial_terms/albstadt.html (2016-02-15)
    Open archived version from archive

  • METTLER TOLEDO - General Distribution Terms - METTLER TOLEDO
    acknowledges that it has no rights and will obtain no rights in the Intellectual Property Rights and the goodwill associated with such rights shall at all times belong and inure to MT The Distributor shall not use or permit to be used by any person or entity under its control any of the Intellectual Property Rights without prior written consent of MT During the term of this Agreement Distributor is entitled to use the METTLER TOLEDO name and logo and other marks owned by MT the MT Marks to promote sales of Products in the Territory Any such use must be approved in advance in writing by MT and must be in accordance with MT s then current corporate design use guidelines Distributor shall use an identifier logo for all activities not relating to the Products which is on no way similar to the identifier logo of MT Distributor shall not i attempt to obtain title to the MT Marks or other confusingly similar names logos or marks or ii use the MT Marks or any combination of words containing the MT Marks or other confusingly similar marks as part of its firm corporate or business name either during the term of this Agreement or thereafter Distributor shall indemnify and hold MT harmless against liability which may arise as a result of Distributor s failure to comply with the foregoing Distributor shall promptly inform MT of potential infringements of the METTLER TOLEDO name and logo Distributor notices in the Territory For purposes of this Agreement Intellectual Property Rights means i any and all rights in patents copyright moral rights database rights and rights in trademarks trade dress designs know how and confidential information ii applications for registration and the right to apply for registration for any of these rights and iii all other intellectual property rights and equivalent or similar forms of protection existing anywhere in the world whether registered or unregistered in all cases which are used or owned by MTand which relate to the Products MT shall make all economically reasonable efforts to ensure that the Products of MT s design furnished hereunder do not infringe upon any third party IP rights The Parties agree that any designs or other special requirements specified by Distributor or its customer or any end user as well as the use and application of Products are within the responsibility of Distributor or its customer or any end user 4 3 Licenses Approvals With MT s reasonable assistance Distributor shall obtain any official registration license approval or certification necessary to distribute the Products in the Territory at its own expense and shall indemnify and hold MT harmless against any liability which may arise as a result of Distributor s failure to obtain such registration license or approval 4 4 Reporting Distributor shall promptly inform MT of any facts or opinions relevant to the marketing of MT s Products Distributor shall on MT s request report on sales and stocks by Products competitors activities in the Territory current prices except for the Distributor s prices margins competitive quotations sales terms and conditions in the Territory relevant developments in local legislation and service information which MT requires for its quality assurance program 4 5 Employees Training Distributor shall employ a team of suitable qualified and competent staff to sell and service the Products in the Territory and to support dealers and to ensure the necessary training of dealer s staff responsible for selling the Products Distributor shall allow its sales and service staff to attend basic and supplementary training courses provided by MT from time to time tuition and all expenses shall be borne by the Distributor 4 6 Stock keeping and Demonstration Equipment Distributor shall hold an adequate stock of Products accessories and spare parts to promptly meet reasonable anticipated demand and to fulfill its service obligations Distributor shall make available at its own cost a sufficient number of demonstration units of the Products for active promotion Distributor also undertakes to maintain a laboratory for applications and demonstrations to handle reasonable customer requests for technical assistance and for testing 4 7 Product Documentation Distributor shall assist MT as and when requested by MT to produce complete and accurate local language labeling instructions for use and other literature for the Products by translating the documentation provided to it by MT in English or another common language if available correctly and in full into the official language s of the Territory at its own expense Distributor shall only make adaptations to the documents as required by the law of the Territory Distributor shall provide MT with copies of promotional material created by Distributor whenever MT has financially contributed to it or promptly upon request by MT in any other case 4 8 Service Distributor shall provide and maintain in respect of the Products in the Territory and irrespective of the place of purchase an adequate after sales service capability Such service shall comprise a warranty performance assurance and a repair and breakdown service in accordance with standards prescribed by MT 4 9 Regulated Products The Distributor shall be responsible for the correct installation calibration and operation of any regulated Products in compliance with all applicable laws and regulations of the place of destination at its own expense Distributor may to the extent permitted by law transfer such responsibility to its customer by a written agreement The Distributor shall inform its customer about any actions to be undertaken or requirements to be fulfilled for the correct installation calibration and operation of regulated Products in compliance with all applicable laws and regulations of the place of destination such as e g calibration recalibration of the goods by the competent calibration authorities for use in a legally regulated field MT may at its sole discretion reserve the sale of certain Products or Product categories to the fulfillment of additional requirements as defined by it such as e g maintaining a certified quality system or fulfilling certain quality requirements being able and or authorized to carry out certain activities or services such as verification conformity assessment calibration installation or repair services having completed certain trainings as determined by MT maintaining certain measuring or test equipment and having such equipment reviewed from time to time being subject to audits etc If such is the case the Distributor must fulfill all such criteria at its own expense MT may require confirmation or documentary evidence thereof at all times 4 10 Insurance Distributor shall maintain and cause its subcontractors to maintain adequate and customary insurance coverage including product liability insurance with generally acceptable underwriters Upon MT s request Distributor shall provide a valid certificate of insurance or a copy of its insurance policies and evidence that its premiums have been paid in full and are up to date 4 11 Destination Coordination All Distributor Orders issued to MT shall be subject to MT s internal Origin and Destination Coordination Policy Policy which may be updated by MT from time to time and which Distributor agrees to be subject to under this Agreement Final determinations as to this Policy shall be rendered by MT in its sole discretion 4 12 Key Accounts Where MT has entered into a global key account agreement with its key accounts setting forth certain discounts or other conditions that are applicable to key account entities within the Territory Distributor agrees to supply the key accounts with the Products in the Territory Distributor will apply the discounts or conditions agreed in the key account agreement it being understood that none of the agreed conditions or discounts shall be considered as fixed or minimum resale prices and that Distributor shall at all times be entitled to offer better discounts or conditions to the key account than the ones set forth in the key account agreement In that case MT shall grant to Distributor an additional discount as set forth in the SBT MT shall periodically update Distributor on key account agreements relevant to the Products and the Territory 5 Appointment of Dealers In order to meet customers service needs upon MT s prior written consent Distributor may appoint dealers in the Territory provided they are subject to the same conditions and obligations as set forth in this Agreement Distributor will promptly inform MT of any such appointment Upon request by MT Distributor shall terminate such dealer arrangements within six months notice Nothing herein shall relieve Distributor from its obligations hereunder and Distributor shall remain liable for the acts of its dealers or other agents of Distributor 6 Ordering and Delivery Distributor agrees to place purchase orders subject to MT s standard terms and conditions of sale via the MT company or companies that MT shall specify from time to time Distributor hereby agrees to accept any late delivery of the Products provided that such delay is not unreasonable If dispatch or assumption of the goods is delayed by Distributor or prevented for reasons for which MT cannot be held responsible the goods will be stored at Distributor s risk and expense 7 Prices Payment Terms Prices for Products discounts and rebates are set out in the SBT MT reserves the right to change prices at any time and shall notify Distributor of any changes in prices at least 30 days before the changes become effective if practicable All duties and taxes shall be paid by Distributor Any user or resale prices referred to in the Agreement its Annexes or in catalogues and discount sheets are recommended prices only and not binding All invoices shall be paid in in the currency set forth in the SBT without any deductions or offset within 30 days of the invoice date unless otherwise agreed in writing If Distributor does not timely pay outstanding amounts MT may require payments in advance If Distributor s payments are more than 30 days overdue i MT may withhold any delivery until full payment is made and ii Distributor agrees to pay interest of 12 per annum on amounts outstanding beyond 30 days 8 Warranties Terms and Conditions MT s standard terms and conditions of sale applicable to all purchases by Distributor pursuant to this Agreement including warranties are set out on www mt com legal as may be amended from time to time These standard terms and conditions of sale shall take precedence notwithstanding any contrary terms that may be placed on any Distributor order or confirmation or other document In the event the website standard terms and conditions of sale conflict with specific terms contained in these GDT the terms of these GDT shall govern and control In consideration for the warranty provided by MT Distributor shall grant customers a corresponding warranty and shall undertake the warranty work according to its service obligations under the Agreement Distributor shall not make any representations or give any warranties in favor of or confer any other benefit on a purchaser beyond those in the Agreement MT shall not be liable to any purchaser as a result of Distributor s breach of this section 9 Indemnity Limitation of Liability The Distributor shall indemnify MT against all losses or damages together with all costs expenses and liabilities including without limitation legal and other professional fees incurred or suffered by or awarded against MT which result from negligence gross negligence violation of law breach or intentional misconduct of Distributor or its subcontractors in the performance of its obligations under this Agreement provided that Distributor s obligation to indemnify MT shall not apply to the extent such claim is due to the negligence or intentional misconduct of MT The parties agree that the limitation of liability contained in MT s standard terms and conditions of sale found at www mt com legal shall also apply to their commercial relationship and this Agreement and is incorporated herein by reference 10 Notification Distributor shall immediately notify MT of all adverse incidents events reports or complaints relating to the Products Distributor shall promptly comply with all reasonable directions of MT Distributor shall also report to MT any adverse events incidents or reports relating to competitive products of which it becomes aware as well as any facts which may adversely Distributor s ability to meet current or future performance targets 11 Traceability and Recalls of Products MT shall be entitled to retrace or recall Products or undertake corrective measures to the Products as it deems necessary Distributor must retain all required documents and information in order to ensure that any Product sold by Distributor to a third party can be retraced and identified by its unique serial number during a period of ten years Such information must include at a minimum the name and contact data of the customer and the Products delivered with Product numbers and delivery dates Distributor shall actively support MT in its efforts by a retracing or recalling such Products or implement such corrective measures to the Products as specified by MT and b providing to MT the information called for by this paragraph upon termination of this Agreement 12 Termination Either party may terminate this Agreement without cause at any time by giving not less than 6 months prior notice in writing Either party may terminate this agreement upon immediate written notice to the other party if a party a is in default in respect of any material obligation on its part and such default has not been remedied within 30 days of written notice thereof or b ceases doing business is discontinued dissolved or has a receiver or liquidator appointed or enters bankruptcy proceedings MT shall be entitled to terminate this Agreement with immediate effect by written notice to Distributor if Distributor a is restructured in a way adversely affecting its activities hereunder b experiences a change in control c fails to achieve agreed annual performance targets d if Distributor becomes encumbered with a lien or e if Distributor is named a party in litigation or potential litigation or becomes the subject of an investigation that in any way MT deems damaging to Distributor s reputation In the event that MT should fail to effectuate termination of this Agreement in accordance with this Agreement upon the occurrence of an event that might entitle MT to terminate this Agreement Event Distributor agrees such failure shall not operate as a waiver of MT s right to thereafter terminate this Agreement as to the same Event any continuation of the same Event or any subsequent Event If Distributor is within the European Economic Area this Agreement shall automatically expire five 5 years from the date of its execution The parties shall in due course before its expiry enter into discussions regarding whether and under what conditions to continue their business relationship 13 Consequences of Termination Upon termination of the Agreement a Distributor shall not be entitled to any compensation whatsoever b MT shall be entitled but not obligated to require the return of all or any part of the Products that are unsold and in salable condition including spare parts supplied to Distributor during the 12 months prior to termination at a cost not greater than the price paid by Distributor and that any Products that are unsold but not in salable condition shall be destroyed by the Distributor at its cost or returned to MT at Distributor s expense whichever is chosen by MT c Distributor will transfer all official licenses approvals or certificates which are in its name to MT and otherwise provide all reasonable assistance in transferring distribution of the Products to MT or its nominee d Distributor shall inform its customers for the Products that the Agreement has been terminated or has expired and shall supply to such customers the name and address of any other entity selling products or new distributor appointed by MT in the Territory e Distributor shall immediately cease to use MT Marks to promote the Products or to make any other use of MT s Intellectual Property Rights except as reasonably required to sell any remaining stocks of the Product if not returned to MT or destroyed as set forth in b above f shall immediately pay to MT all outstanding amounts under the Agreement which shall immediately become due and payable and g will immediately transfer to MT all information set forth in section 11 above The termination or expiration of the Agreement shall not of itself give rise to any liability on the part of the MT to pay any compensation to the Distributor for loss of profits or good will Upon termination of the Agreement any outstanding orders already accepted by MT shall be filled by MT and any outstanding obligations on the part of Distributor shall be performed by Distributor in accordance with the terms of the Agreement For a period of six months after termination Distributor shall pass on to MT or its designee without delay any inquiries regarding Products from third parties 14 Other Provisions 14 1 Confidentiality Distributor shall treat all non public information and data obtained from MT during the term of the Agreement as confidential Such information shall be used solely for purposes of the Agreement This obligation of confidentiality and non use shall survive termination of the Agreement for a period of three years Upon termination of the Agreement or if so requested by MT the Distributor agrees to return or destroy any documents or data containing confidential information supplied by MT or any copies thereof or extracts there from made by the Distributor 14 2 Assignment Distributor may not assign any of its rights or obligations under the Agreement without MT s prior written consent 14 3 Notices Any notice pertaining to the Agreement shall be considered as having been given when delivered personally or when mailed via registered first class air mail to the address specified in the SBT 14 4 Severability Should any part of these GDT or of the Agreement be deemed legally invalid at any time this shall not affect the validity

    Original URL path: http://fr.mt.com/fr/fr/home/site_content/legal/distribution-terms/Mettler-Toledo-GDT.html (2016-02-15)
    Open archived version from archive

  • Balances d'analyse XPE - Aperçu - METTLER TOLEDO
    logiciel LabX de METTLER TOLEDO affiche les instructions d utilisation conformes aux MON sur l écran tactile de la balance Grâce à la gestion des données aux calculs et aux comptes rendus automatiques les balances équipées de LabX répondent facilement aux exigences de sécurité et de traçabilité des procédés les plus drastiques et vous accompagnent dans vos efforts de dématérialisation au sein de votre laboratoire En savoir plus Résultats fiables Les balances d analyse Excellence XPE associent les technologies de pesage METTLER TOLEDO brevetées à des décennies d expérience pour vous offrir les meilleurs résultats de pesage du marché rapidement et en toute fiabilité En savoir plus Fonctionnement mains libres Les balances d analyse Excellence ont un design ergonomique destiné à vous simplifier la vie autant que possible Les capteurs SmartSens vous permettent d utiliser votre balance d un simple geste de la main facilitant ainsi les tâches de pesage et évitant les problèmes de contamination croisée En savoir plus Nettoyage simple Grâce au plateau SmartGrid exclusif et au pare brise démontable en quelques secondes vous êtes toujours assuré de disposer d une zone de pesage propre et sûre En savoir plus Système RFID Pipette Les pipettes modernes sont équipées d une puce RFID qui permet de stocker de nombreuses informations ID et volume de la pipette dates du dernier et du prochain étalonnage etc Grâce au nouveau lecteur RFID intégré vous pouvez contrôler ces informations en quelques secondes et consulter un compte rendu complet sur le terminal de la balance de façon fiable et rapide En savoir plus Système RFID Titrage Saisissez les informations concernant les échantillons à titrer en toute sécurité sur la balance et transférez les au titreur sans effort via le bécher de titrage et l étiquette RFID SmartSample En savoir plus Évolutivité totale Le pesage automatique au moyen des modules de distribution de poudre et de liquide Quantos vous permet d obtenir le plus haut niveau d exactitude et de sécurité lors de la préparation des échantillons et peut réduire la pesée minimale jusqu à 30 Dosage automatisé de poudres et de liquides Savoir faire logiciels et accessoires Good Weighing Practice Logiciel LabX Accessoires Produits et spécifs Produits Portée maximale Précision d affichage Pesée minimale USP type Répétabilité Linéarité Temps de stabilisation Dimensions PxHxL Dimensions Profondeur Dimensions Hauteur Dimensions du plateau de pesageProfondeur Dimensions du plateau de pesage PxL Material Number XPE105 Envoi d une offre de prix Matériel No 30087635 Comparer 120 0 g 0 01 mg 14 0 mg 0 015 mg 0 1 mg 2 5 s 487 mm x 322 mm x 263 mm 487 0 mm 322 0 mm 78 0 mm 78 mm x 73 mm 30087635 XPE105DR Envoi d une offre de prix Matériel No 30087924 Comparer 120 0 g 0 1 mg 14 0 mg 0 015 mg 0 1 mg 1 5 s 487 mm x 322 mm x 263 mm 487 0 mm 322 0 mm 78 0 mm 78 mm x 73 mm 30087924

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/XPE_Analytical_Balance.html (2016-02-15)
    Open archived version from archive

  • Balances d'analyse XSE - Aperçu - METTLER TOLEDO
    de multiples options de connectivité les balances XSE vous offrent de nouvelles opportunités en matière d applications de pesage Conçues mises au point et fabriquées en Suisse pour une qualité et une fiabilité hors pair Vous disposez de fonctions de pesage intuitives Nouvel écran couleur avec fonction d avertissement StatusLight Plateau de pesée SmartGrid revu et corrigé et ErgoClips exclusifs Nouvelle technologie d élimination des charges électrostatiques TestManager qui facilite la mise en oeuvre des tests de routine Logiciel LabX pour des instructions de travail personnalisées à l écran suivant votre application Balances d analyse XSE Consultez la vidéo pour en savoir plus sur le pesage sans souci Balance prête Le voyant d état StatusLight intégré au terminal utilise des couleurs pour indiquer intuitivement l état de la balance un voyant vert indique que la balance est prête un voyant jaune est un avertissement et les erreurs sont signalées en rouge Le voyant d état StatusLight indique clairement si la balance est prête pour commencer le pesage En savoir plus Résultats fiables Les balances d analyse Excellence associent les technologies de pesage METTLER TOLEDO brevetées à des décennies d expérience pour vous offrir les meilleurs résultats de pesage rapidement et en toute fiabilité En savoir plus Gestion des flux de travail par l utilisateur Le logiciel LabX de METTLER TOLEDO affiche les instructions d utilisation conformes aux MON sur l écran tactile de la balance Grâce à la gestion des données aux calculs et aux comptes rendus automatiques les balances équipées de LabX répondent facilement aux exigences de sécurité et de traçabilité des procédés les plus drastiques et vous accompagnent dans vos efforts de dématérialisation au sein de votre laboratoire En savoir plus Nettoyage simple Grâce au plateau SmartGrid exclusif et au pare brise qui peut être démonté en quelques secondes vous êtes toujours assuré de disposer d une zone de pesage propre et sûre En savoir plus Système RFID Pipette Les pipettes modernes sont équipées d une puce RFID qui permet de stocker de nombreuses informations ID et volume de la pipette dates du dernier et du prochain étalonnage etc Le nouveau lecteur RFID intégré permet de contrôler ces informations en l espace de quelques secondes Avec une seule lecture le lecteur RFID intégré collecte et affiche sur le terminal l ensemble des informations stockées dans la puce RFID de votre pipette cette opération est rapide et sûre En savoir plus Système RFID Titrage Saisissez les informations concernant les échantillons à titrer en toute sécurité sur la balance et transférez les au titreur sans effort via l étiquette RFID SmartSample apposée sur le becher de titrage En savoir plus Savoir faire logiciels et accessoires Good Weighing Practice Logiciel LabX Accessoires Produits et spécifs Produits Portée maximale Précision de lecture Poids minimal USP type Re pe tabilite Line arite Dimensions Largeur Dimensions Profondeur Dimensions Hauteur Material Number XSE 105DU Envoi d une offre de prix Matériel No 30087716 Comparer 41 0 g 120 0 g 0 01 mg 0 1

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/XSE_Analytical_Balance.html (2016-02-15)
    Open archived version from archive

  • Balances d'analyse XS - Aperçu - METTLER TOLEDO
    préservée La chambre de pesée de la balance est accessible facilement avec les deux mains Grâce au terminal repositionnable l environnement de travail est facilement adapté à vos besoins Un grand écran numérique est également disponible pour optimiser le confort et réduire la fatigue oculaire due aux tâches de pesage répétitives Hautes performances Des résultats rapides et stables SmartGrid le nouveau plateau de pesée à grille accélère vos processus de pesage La structure à grille permet la circulation des turbulences de l air à travers le plateau réduisant ainsi le temps de stabilisation pour des résultats plus rapides Envoi d une offre de prix Des tâches de pesage répétitives moins fatigantes Les chiffres de grande taille 16 mm qui s affichent à l écran sont faciles à lire La fatigue oculaire est réduite et l utilisateur reste concentré sur la tâche de pesage Productivité élevée Les ErgoClips amovibles permettent le pesage direct de l échantillon ce qui élimine les erreurs de transfert Les réductions des coûts sont ainsi significatives en particulier pour les laboratoires travaillant avec des matériaux précieux Gestion des flux de travail par l utilisateur Le logiciel LabX de METTLER TOLEDO affiche les instructions d utilisation conformes aux MON sur l écran tactile de la balance Grâce à la gestion des données aux calculs et aux comptes rendus automatiques les balances équipées de LabX répondent facilement aux exigences de sécurité et de traçabilité des procédés les plus drastiques et vous accompagnent dans vos efforts de dématérialisation au sein de votre laboratoire Envoi d une offre de prix Produits et spécifs Produits Portée maximale Précision d affichage Poids minimal USP type Dimensions PxHxL Dimensions Profondeur Dimensions Hauteur Temps de stabilisation Dimensions du plateau de pesageProfondeur Dimensions du plateau de pesageLargeur Material Number XS104 Envoi d une offre de prix Matériel No 11106012 Comparer 120 0 g 0 1 mg 82 0 mg 453 mm x 322 mm x 263 mm 453 0 mm 322 0 mm 1 5 s 78 0 mm 73 0 mm 11106012 XS105 Envoi d une offre de prix Matériel No 30132870 Comparer 120 0 g 0 01 mg 16 0 mg 263 0 mm 453 0 mm 322 0 mm 3 0 sec 78 0 mm 73 0 mm 30132870 XS105DU Envoi d une offre de prix Matériel No 11106009 Comparer 120 0 g 0 1 mg 20 0 mg 453 mm x 322 mm x 263 mm 453 0 mm 322 0 mm 1 5 s 78 0 mm 73 0 mm 11106009 XS204 Envoi d une offre de prix Matériel No 11106003 Comparer 220 0 g 0 1 mg 82 0 mg 263 0 mm 453 0 mm 322 0 mm 1 5 sec 78 0 mm 73 0 mm 11106003 XS204DR Envoi d une offre de prix Matériel No 11106006 Comparer 81 0 g 220 0 g 0 1 mg 1 0 mg 82 0 mg 263 0 mm 453 0 mm 322 0 mm 1 5 sec 78 0 mm

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/XS_Analytical_Balance.html (2016-02-15)
    Open archived version from archive

  • Balances d'analyse MS - Aperçu - METTLER TOLEDO
    intégrées processus simplifiés Fonctions d avertissement résultats valides La fonction MinWeigh assure le respect des tolérances de processus Le poids net de l échantillon s affiche en rouge s il est inférieur à une valeur minimale pré programmée Deux méthodes existent pour la fonction MinWeigh personnalisée ou certifiée Protection par mot de passe des paramètres de la balance Créez un mot de passe pour restreindre la modification des paramètres de la balance au personnel autorisé Les fonctions ayant une influence sur les performances métrologiques sont protégées contre toute modification accidentelle Envoi d une offre de prix Écran optimisé pour plus de simplicité au quotidien Le large écran tactile couleur TFT de 7 peut être utilisé avec des gants en coton en latex ou en silicone Une interface utilisateur intuitive et des chiffres de 18 mm de hauteur apportent davantage de confort à vos tâches quotidiennes Jusqu à 4 ID par échantillon pour une meilleure traçabilité Saisissez jusqu à 4 ID par échantillon à l aide du clavier tactile ou d un lecteur de codes barres pour une traçabilité rapide et fiable de l utilisateur de l échantillon du lot etc Nettoyage facile pour un gain de temps et moins d efforts Le pare brise QuickLock se démonte en quelques secondes sans outil Toutes les pièces de la balance sont lavables au lave vaisselle Les surfaces lisses et arrondies facilitent le nettoyage Balance connectée pour une gestion simple des données Hôte USB appareil USB RS232 Bluetooth en option Fonction PC Direct intégrée transfert simple des données sans installation de logiciel sur le PC Produits et spécifs Produits Portée maximale Précision d affichage Répétabilité Pesée minimale USP type Temps de stabilisation Diamètre du plateau de pesage Interfaces Réglage Résolution Conformité pour usage commercial Boîtier Dimensions Profondeur Dimensions Hauteur Dimensions PxHxL Material Number MS104TS Envoi d une offre de prix Matériel No 30133522 Comparer 120 0 g 0 0001 g 0 1 mg 160 0 mg 2 0 s 90 0 mm USB Host USB Device RS232 Interne FACT 0 0001 g Nº Aluminium moulé 347 0 mm 345 0 mm 347 mm x 345 mm x 204 mm 30133522 MS304TS Envoi d une offre de prix Matériel No 30133524 Comparer 320 0 g 0 1 mg 0 1 mg 160 0 mg 3 0 s 90 0 mm USB Host USB Device RS232 Interne FACT 0 1 mg Nº Aluminium moulé 347 0 mm 345 0 mm 347 mm x 345 mm x 204 mm 30133524 MS204TS Envoi d une offre de prix Matériel No 30133523 Comparer 220 0 g 0 1 mg 0 1 mg 160 0 mg 2 0 s 90 0 mm USB Host USB Device RS232 Interne FACT 0 1 mg Nº Aluminium moulé 347 0 mm 345 0 mm 347 mm x 345 mm x 204 mm 30133523 MS204 Semi Micro Envoi d une offre de prix Matériel No 11142074 Comparer 220 0 g 0 1 mg 0 04 mg 82 0 mg 2 0 s 90

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/MS-TS_Analytical.html (2016-02-15)
    Open archived version from archive

  • Balances d'analyse ML - Aperçu - METTLER TOLEDO
    mots de passe plus de modifications accidentelles performances métrologiques protégées La fonction MinWeigh garantit la précision des mesures pesée minimale préréglée les chiffres en rouge indiquent que le poids net de l échantillon est trop faible La fonction ISO Log intégrée garantit la traçabilité totale des réglages de votre balance Toutes les modifications apportées au cours des tests de routine ou par le biais de FACT sont automatiquement enregistrées Balance intuitive avec écran tactile de 4 5 nombreuses applications intégrées et performances de pesage impressionnantes La balance la plus compacte de sa catégorie Aperçu Produits et spécifs Documentation Services Aperçu Produits et spécifs Documentation Services Une Zone De Travail Optimisée Balance dotée d une conception ergonomique de nombreuses applications intégrées d un fonctionnement sur piles pour une portabilité totale et bien évidemment de performances de pesage d exception et d une grande robustesse Tout cela en étant la balance la plus compacte de sa catégorie Découvrez la nouvelle balance ML T Dotées d une cellule de pesée haute performance de fonctions de sécurité et d instructions utilisateur intégrées les balances ML T sont synonymes de fiabilité Facilité d utilisation Format compact et pratique Résultats fiables Fonctionnement tactile intuitif L écran tactile couleur TFT de 4 5 peut être utilisé avec des gants en coton en latex ou en silicone L interface utilisateur est intuitive et l affichage en grands caractères est très confortable d utilisation Une fonction intégrée pour une mise de niveau facile La fonction intégrée LevelControl émet un avertissement lorsque la balance n est pas de niveau et elle fournit des instructions à l écran pour équilibrer la balance en quelques secondes Une cellule de pesée éprouvée pour des résultats fiables Notre cellule de pesée MonoBloc reconnue dotée de la fonction de réglage interne automatique FACT assure une fiabilité optimale Sa protection intégrée contre les surcharges est synonyme de longévité La fonction MinWeigh assure un respect total des tolérances La valeur de la pesée nette reste rouge tant qu elle n est pas supérieure à la pesée minimale prédéfinie Une pesée minimale définie par l utilisateur peut également être programmée dans la balance en vue de fournir un facteur de sécurité supplémentaire Nettoyage rapide et simple Le pare brise QuickLock se démonte en quelques secondes sans outil Toutes les pièces de la balance sont lavables au lave vaisselle Les surfaces sont lisses et arrondies pour rendre le nettoyage simple et sûr Balance connectée pour une gestion simple des données Connectivité illimitée grâce à l hôte USB au lecteur USB à la liaison RS232 et au Bluetooth en option La fonction PC Direct intégrée facilite le transfert de données sans nécessiter de logiciel PC Produits et spécifs Produits Portée maximale Précision d affichage Répétabilité Pesée minimale USP type Temps de stabilisation Diamètre du plateau de pesage Interfaces Réglage Résolution Conformité pour usage commercial Boîtier Dimensions Profondeur Dimensions Largeur Conception hygiénique Material Number ML104T Envoi d une offre de prix Matériel No 30243394 Comparer 120 0 g 0 1 mg

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/ML-T_Analytical_Balances.html (2016-02-15)
    Open archived version from archive

  • Balance analytique ME-T - Aperçu - METTLER TOLEDO
    Le guide de pesée facilite le dosage vers une valeur cible Les chiffres du grand écran tactile couleur s affichent en bleu ou rouge selon que les tolérances sont respectées ou non Les résultats notamment les évaluations statistiques peuvent être directement transmis à une imprimante ou un PC par voie électronique éliminant ainsi toute transcription manuelle et les risques d erreurs associés La balance ME T associe les fonctions de pesage quotidiennes essentielles et une grande facilité d utilisation pour offrir des performances de premier plan et des résultats fiables jour après jour Aperçu Produits et spécifs Documentation Services Aperçu Produits et spécifs Documentation Services Fonctionnalités essentielles solides performances Une balance fiable adaptée à tous les travaux de laboratoire qui associe les fonctions de pesage essentielles et une grande facilité d utilisation pour offrir des résultats fiables jour après jour Fonctionnement tactile intuitif Grâce à des icônes et des instructions intuitives le grand écran tactile couleur TFT 4 5 de l unité permet de travailler rapidement même en portant des vêtements de travail ou des gants en caoutchouc Les graphiques et les textes multilingues vous guident tout au long de vos tâches de pesage Facilité d utilisation et sécurité intégrée Huit applications intégrées incluant le tri pondéral la totalisation et la formulation permettent aux opérateurs de commencer à travailler immédiatement La saisie des identifiants d échantillons et l accès protégé par mot de passe interdisent toute modification de vos paramètres par le personnel non autorisé Gestion aisée des données Plusieurs interfaces prennent en charge les connexions aux lecteurs de codes barres aux imprimantes et aux PC pour une traçabilité et une gestion des données aisées Le téléchargement et le transfert des données s effectuent très simplement grâce aux interfaces USB et RS232 ainsi qu à l adaptateur Bluetooth disponible en option Précision garantie Une cellule de pesée dotée d une compensation électromagnétique EMFC et associée à la fonction FACT Fully Automatic Calibration Technology fournit des résultats fiables et ajuste automatiquement la balance La protection intégrée contre les surcharges garantit la longévité de la balance Performances et durabilité La balance ME T est dotée d un socle métallique suffisamment robuste pour permettre son utilisation dans les environnements difficiles tandis que ses surfaces lisses facilitent son entretien et son nettoyage Produits et spécifs Produits Portée maximale Précision d affichage Pesée minimale USP type Diamètre du plateau de pesage Réglage Interfaces Écran Dimensions Linéarité type Linéarité Conception hygiénique Material Number ME54T Envoi d une offre de prix Matériel No 30216540 Comparer 52 0 g 0 1 mg 0 16 g 90 0 mm Interne FACT RS232 Périphérique USB Hôte USB Écran tactile couleur TFT 4 5 344 0 mm 0 06 mg 10 0 g Oui 30216540 ME104T Envoi d une offre de prix Matériel No 30216541 Comparer 120 0 g 0 1 mg 0 16 g 90 0 mm Interne FACT RS232 Périphérique USB Hôte USB Écran tactile couleur TFT 4 5 344 0 mm 0 06 mg 20 0 g Oui

    Original URL path: http://fr.mt.com/fr/fr/home/products/Laboratory_Weighing_Solutions/Analytical/ME-T_Analytical.html (2016-02-15)
    Open archived version from archive



  •